2.4G Directional RFID Reader IDL-RGR06

Product serial number

2.4G Directional RFID Reader IDL

Function Features

Technical Parameters

2.4G Directional RFID Reader

Function Features:
1) With high-performance 32-bit ARM Cortex-M3 core microcontroller
Tag Identification Speed: 2000 tags/sec (sending by time)
Tag Reading Capacity: 1000 tags/sec
Tag Buffer Capacity:1000 tags (anti-reread)
2) With 18dBi high-gain directional antenna
Maximum Reading Distance: 120 meters
Directional Capacity: 30:1
3)With signal attenuator, reading distance can be adjusted from 1 to 120 meters

Technical Parameters
Processor: 32-bit ARM Cortex-M3 core microcontroller
Work Frequency: 72MHz
Reading Capacity: 1000 tags/sec
Buffer Capacity:1000 tags (anti-reread)
Reading Distance: Maximum 120 metes
Attenuation Distance: 1 to 120 meters adjustable( distance error ±15%)
Voltage: +12VDC (7-12VDC)
Current: ≦100mA
Communication Interface: Wiegand 26bit,34bit,36bit,44bit,RS232,RS485 (Factory setting:9600 8 N 1)
Work Temperature: -40℃ to +85℃ (industrial-grade)
Work Humidity:10% to 90%RH
Frequency Range: 2400-2480MHz
Gain:18dBi
Power Angle: Horizontal 55°/Vertical 45°
Polarization Way: Vertical/Horizontal
VSWR: ≦1.5
Front to Back Ratio:≥24dB
Input Impedance: 50Ω
Thunder Protection: DC ground
Wind Resistance:80m/s
Installation: LU pole
Dimension:308*308*80mm
Casing: ABS materials, waterproof

Wiring diagram

No.	Color	Pin Specification
1	red	+12VDC(7-12 power)
2	black	GND(connect to ground)
3	green	D0 ( Wigand data 0)
4	white	D1 ( Wigand data 1)
5	brown	TXD (RS232 sending terminal)
6	orange	RXD (RS232 receiving terminal)
7	blue	A (RS485)
8	purple	B (RS485)
9	yellow	IN1 (reader controller input)
10	gray	Beeper( buzzer open collector)

Communication Agreement
RS232 and RS485 (sending type only)
Communication setting: baud 9600,8 data bit,1 stop bite, without check

Start code

(1 bite)

Add code

(1 bite)

Card No.

(5 bite)

Checksum

(1 bite)

End code

(2 bite)

0×02

2 bite ASCLL

10 bite ASCLL

2 bite ASCLL

0×00 0×0A

1 2 3   4   5 6 7 8 9 10 11 12 13 14 15 16 17
Send: <02><30><31><30><30><31><32><33><33><34><41><42><43><44><42> <46><0D><0A>
1      Start Code 0×02 fixed string
2-3    Add Code 0×01 field 1-255 2 bite ASC11 code sending
4-13   Card No. 001234ABCD value field 0000000000-FFFFFFFFFF
14-15 Sum-check   0×BF value field 0×00-0×FF Get the lowest bite of add code and card number and as 2 bite ACSLL code sending.
16-17 End code 0×0D 0×0A fixed-string <CR><LF>