Barrier Gate Debugging!

Time of issue:

2014-02-10 15:39

Source:

Photonic limit switch minitrim
 
We have adjust the photonic limit switch at well work position before selling, no need to adjust again at normal condition. If want to adjust it, please put the pole at vertical or horizontal position, loosen the screws of light blocking layer, and turn it until indicator on. Red color is horizontal limit position; green color is as vertical limit position.
  
Spring power balance debugging
 
(1)We have adjusted the spring power balance at well work condition. If need to change the length or weight of pole, need to adjust the spring balance again. The standards refer to can let the pole move between horizontal angle and vertical angle by hand freely. 
 
(2)pole with the flutter trouble, and need to adjust the spring power .pole flutter when pole up, the spring power is too heavy, and need to reduce the spring balance power. Pole flutter when pole at place, the spring balance is too light, need to add spring balance power.
 
Emergency handling after power off 
 
Close the power supply first after power off, open cabinet and revolve rocking handle, put the pole on vertical position .
 
Normal failure
 

NO.

Phenomenon

reason

Setting way

1

Machine work, barrier pole not work

Capacity connect to main controller or not

Photonics connect to main controller or not

1.put the two line of capacity connect to main controller front/inverse interface

2.put the 4 lines of photonics limit switch connect to main controller

2

Pole shake when in work procession

1.spring balance not matching

2.cabinet not fix well

1.adjusing spring power

2.fix the cabinet well

3

Not vertical or horizontal when pole in place

Light blocking layer no in right position

Refer to photonic limit switch mini trim

 

Previous page

How to install Loop for the Loop Detector?

none

Next page

Related News

Barrier Radar Detector with Anti-smash and trigger function to replace loop detector

Barrier Radar Detector with Anti-smash and trigger function to replace loop detector

Face Recognition with Temperature Detection

Face Recognition with Temperature Detection--can detect face, mask and also can add extra LED light

Add LED light to Face Recognition with Temperature Measurement

Add LED light to Face Recognition with Temperature Measurement.

Anti-hit Barrier Radar for parking system to replace loop detector

Anti-hit Barrier Radar for parking system to replace loop detector

Temperature Measurement and Face Recognition Integrated Device

Temperature Measurement and Face Recognition Integrated Device

How to test Long range RFID transponder's frequency and reading distance?

How to test Long range RFID transponder's frequency and reading distance?